Browse all practice questions for the TSSA Refrigeration Class 4A Certificate Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

TSSA Refrigeration Class 4A Certificate Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What may be the result of igniting a greater than normal amount of combustible mixture?
  • What is the function of the windbox in a boiler?
  • The complete combustion of carbon is represented by the balanced equation C + O2 = ?
  • Which ASME code contains Recommended Guidelines For The Care of Power Boilers?
  • When is a visual inspection done on a weld?
  • What are the two main categories of manufactured steel piping?
  • In a parallel circuit, what happens to the voltage across each component?
  • What is a characteristic of a mechanical steam trap?
  • Which device converts a visible light signal into an instrument analog signal?
  • The purpose of having an upward movement of a switch handle to close the switch is:
  • What must a qualified pressure welder do before welding on a pressure vessel?
  • What type of systems utilize signals to adjust operations without human intervention?
  • Internal furnaces are:
  • Which of the following variables is critical in pneumatic control systems?
  • If a few turns of wire are wrapped around a core of soft iron and a current is passed through the wire, what is created?
  • Which document serves as the primary reference for pressure equipment regulation?
  • What is the most common type of standpipe system that is easy to maintain?
  • In which context is acid rain specifically a concern?
  • In what area are Power Engineers expected to show proficiency?
  • In managing maintenance, what is a task that cannot be performed solely by a computer?
  • What is the main function of a pressure relief valve?
  • Foam fire extinguishers are primarily used for which classes of fires?
  • What is a major disadvantage of a floor-standing pump extinguisher compared to a backpack extinguisher?
  • What is the latent heat of evaporation indicated in the Steam Tables?
  • What is essential during the blowoff process of a steam boiler?
  • What is the impact of increased wall thickness on the structural integrity of pipes?
  • Bottom Blow Off valves:
  • Which type of oil burner operates without external air pressure?
  • If the downward force between surfaces is doubled, what happens to static friction?
  • What is a characteristic of wrought iron?
  • When using a basic differential pressure transmitter for flow measurement, what varies with the flow?
  • How does radiant heat travel?
  • What is necessary for an analog signal to be processed effectively?
  • What type of change occurs when a substance undergoes a transformation resulting in a new composition?
  • If plant liquids negatively impact the ecosystem, how are they categorized?
  • What material has a high resistance to corrosion among the options given?
  • In refrigeration systems, flooded evaporators are known for?
  • What must employers avoid shortcuts on?
  • What should a pressure reducing valve station have to ensure safe and continuous operation?
  • Which of the following is typically NOT part of a power engineer's job description?
  • What is the primary purpose of a superheater in a boiler?
  • A safe work permit for cold work is intended for which type of work?
  • Where should a steam trap be installed in relation to its piping system?
  • When do heating boilers achieve maximum efficiency?
  • How can a Class "B" fire be most effectively extinguished?
  • Compared to Penetrant Testing, what is a requirement for Radiographic testing?
  • A dry chemical extinguisher is most appropriate for which class of fire?
  • Arc welding produces:
  • What national standard has been adopted by each jurisdiction in Canada as part of their applicable Act and/or Regulations?
  • What is a common characteristic of Class "C" fires?
  • What is an advantage of the inclined "U" tube manometer compared to a standard "U" tube manometer?
  • Why are gaskets installed between pipe flanges?
  • Which valve design has the greatest capability to handle slurries and fluids with high suspended solids?
  • Run time totals, recorded by a computer, are commonly used for what purpose?
  • What effect does increasing the resistance have on the current in a circuit for a constant voltage?
  • How are shot cleaning pellets transported to the top of the boiler?
  • A diaphragm type pressure gauge:
  • What is a common symptom of water treatment issues in boilers?
  • According to the CSA B-51 code, why is a blowoff tank necessary?
  • What does SOPEEC stand for in the context of power engineering?
  • In what situation is a low water cutoff device critically important?
  • An advantage of a vertical tubeless firetube boiler is that it requires:
  • Cast iron boiler capacity:
  • Cascade control utilizes:
  • What is the primary use of plastic foam pipe insulation?
  • What does the right hand rule for generators help to determine?
  • What is impact strength also known as?
  • What is the term for the process of expanding tubes into a tube sheet?
  • Why must the steam space of a boiler be sufficiently large?
  • The yoke that supports the main components of the DC machine is frequently made of:
  • When identifying a valve for rejection, what factor should be considered first?
  • What are automatic systems that can make decisions referred to as?
  • The valve that is least susceptible to wire drawing and seat erosion is the _________ valve.
  • Which option is NOT an advantage of a packaged firetube boiler?
  • What is the purpose of a bimetal thermometer?
  • What was the term for the masonry work surrounding the furnace in older boilers?
  • Modular PLCs can be expanded by adding:
  • When conducting a weld inspection, "indications" in the weld:
  • What type of heat causes temperature changes without altering the state of a substance?
  • What is a common application of analog converters in control systems?
  • Why is the pressure that acetylene is used at so important?
  • Which groups primarily compose committees that establish standards?
  • Which of the following statements about steam distributing heating coils is true?
  • What is the key focus of the National Fire Protection Association Codes?
  • In a low-pressure serpentine watertube boiler, the tubes are attached by either _______ or by using ferrules.
  • What is required for effective mechanical fuel oil atomization?
  • A packaged watertube boiler having two mud drums is the:
  • Within a specific class of pipe, the outside diameter of heavy-weight pipe is:
  • What is the primary purpose of flux in welding?
  • Which code contains rules for the construction of power boilers?
  • Who is responsible for health and safety in the workplace?
  • A retractable steam soot blower is cooled by which medium when operating?
  • What is the main purpose of a blowoff tank in a boiler system?
  • Why are brushes made from carbon in brush gear for DC machines?
  • What is the maximum pressure and temperature for cast iron boiler construction?
  • What is the purpose of Regulations in relation to Acts?
  • Up to and including DN 300 mm pipe, what does "nominal pipe size" refer to?
  • The voltage drop across a 20 Ω resistor with 10 A flowing would be _____ V.
  • Which organization establishes standards for stack emission detection techniques?
  • Welding together pipes that are 2 inch nominal size or smaller is usually done using:
  • What is the ratio of the load to the effort in a simple machine called?
  • Each pass in a multi-pass weld must:
  • What is a material that transfers electric charge called?
  • Which type of fire extinguisher is not typically used for electrical fires?
  • Which of the following is an advantage of electrical control systems?
  • Which one of the following fusion welding processes is a totally manual process?
  • What term encompasses spills, seepages, and leaks?
  • Transformers are often cooled by?
  • What is a common condition that can lead to electrical fires in buildings?
  • Which strategy is ineffective for reducing potentially damaging sound pressure levels for plant personnel?
  • What does NFPA 25 primarily cover?
  • Chemicals are introduced into the boiler:
  • The biggest advantage of an outside screw and yoke, rising stem valve over other designs is that it is_________.
  • Which material property indicates a material's ability to be stretched without breaking?
  • What is required in order to progress to a higher certificate in the power engineering field?
  • A tube expander is used to:
  • Which component is crucial for steam generation in a boiler?
  • What document outlines the qualifications for repair and supervisory personnel?
  • What material is commonly used in modern furnaces to form the furnace walls compared to early watertube boilers?
  • Which of the following is an example of a homogeneous mixture of solids?
  • A shunt type DC generator produces _____ voltage?
  • What is one method to increase natural draft?
  • What is the primary function of shielding gas in welding?
  • Which type of construction is commonly used for tubes in high pressure service?
  • Medium carbon steel becomes difficult to weld when its carbon content exceeds:
  • According to the Second Law of Thermodynamics, heat flows from a:
  • What is the main purpose of thermometers on the inlet and outlet piping of a valve station?
  • What happens to current flow as applied voltage increases?
  • What is the required method for disposing of a caustic boiler cleaning liquid?
  • What is the maximum operating voltage for a jet-type electrode boiler?
  • A control valve that has one plug that moves upward to close the port is referred to as what?
  • What is the most common measurement made with an electrical meter?
  • During an injury-related investigation, when may work be suspended at the site?
  • In a "closed loop" control system, how is the control behavior characterized?
  • Mineral and organic matter is the basic component of?
  • Which of the following is true about pressure controllers?
  • What is the mass of a 2 m length of Schedule 40 pipe with an outside diameter of 101.6 mm?
  • To burn coal in a fluidized bed boiler, the inert bed material must be heated to about how many degrees Celsius?
  • Static friction is:
  • What type of actuator configuration is defined by keeping one side of the diaphragm open to atmosphere?
  • Which national legislative item has been adopted by each jurisdiction in Canada as part of their applicable regulations?
  • Current flow is directly affected by:
  • What is a frequent cause of serious accidents with valves?
  • What is the purpose of the firing rate control valve in a modulating burner?
  • The measure of electrical resistance in ohms is indicated by which symbol?
  • What is the required steam pressure for mechanical fuel oil atomization?
  • The basic unit of mechanical or electric power is the?
  • Which of the following is not a common use for steam?
  • Work is defined as:
  • Under which condition is a structure most likely to fail?
  • How often should fire pump testing be completed?
  • What is a possible financial strategy to lessen the cost of reclaiming a work site?
  • Which system can PLCs not be customized for?
  • What is the appropriate extinguishing medium for a Class "D" fire?
  • All pipe weights with the same nominal pipe size have the same:
  • What is the primary natural contributor to organic matter in soil?
  • What term describes a material's ability to resist penetration?
  • When talking about welding, what is the "parent metal"?
  • Which group recommends updates to Power Engineer learning materials?
  • What are the two types of designs for expansion joints?
  • Why is proper draft significant for the plant operator?
  • Fin spacing of 1.814 to 6.35 mm is most commonly used for what type of coils?
  • What property makes stainless steel notable?
  • The material designation marking on a valve __________________.
  • What is the significance of fin spacing in heating coils?
  • What is the primary advantage of using an inclined "U" tube manometer compared to a standard U-tube manometer?
  • In an automatic control system, the controller output signal is directed to which component?
  • With regards to greenhouse gases, which of the following is the most powerful?
  • Which valve type requires specific and routine lubrication?
  • What is the name of the "Boiler, Pressure Vessel and Pressure Piping Code"?
  • Which code contains rules for the construction of low-pressure hot water supply boilers?
  • Why are boilers designed with multiple combustion gas passes?
  • Why is Carbon Dioxide effective for fighting electrical fires?
  • The ability of a material to retain its deformed shape when the load causing deformation is removed is called:
  • If a series circuit consists of resistances of 20, 50, and 80 ohms, what would be the current flowing with a supply voltage of 400 V?
  • What is a disadvantage of using a cast iron boiler?
  • What term is used to refer to the provinces and territories of Canada in this context?
  • Which welding method primarily uses a consumable electrode?
  • A flowing liquid has kinetic energy as a function of its velocity. When its velocity increases:
  • What should be included in daily checks of fire sprinklers?
  • Which code is referred to as the "Mechanical Refrigeration Code"?
  • What is "toughness"?
  • How is a uniformly applied force, acting at right angles to a surface, defined?
  • How can carbon transfer into rock formations occur?
  • External tensile forces acting parallel but not in line produce _________ in an object.
  • If a system of forces is in equilibrium, which of the following statements is true?
  • What are the two types of Penetrant Testing?
  • A bellows corrugated expansion joint is suitable for pressures up to approximately how many kPa?
  • Which analog signal input is accepted by a PLC?
  • In the process of making iron, limestone is added to:
  • A special PLC that allows minimal programming may be used for:
  • Which of the following is NOT a type of oil burner?
  • What is the main purpose of insulation on piping systems?
  • Which of the following statements about inclined planes is FALSE?
  • What defines the position of a valve actuator?
  • When Radiographic Testing is performed, what is required regarding the testing area?
  • Which type of evaporator requires the greatest refrigerant charge?
  • Which property characterizes the behavior of a direct acting valve?
  • What type of pipe is typically used for high-pressure steam systems?
  • Which type of computer circuit is responsible for storing and retrieving information?
  • Before performing a task, what should a Power Engineer primarily consider?
  • What happens to current in a series circuit?
  • What electrical classification applies to an area with dust concentrations that could produce ignitable mixtures?
  • What is the main purpose of a refrigeration condenser?
  • What action must be taken with the black demand pointer of a kilowatt-hour meter?
  • In a magnetic field with supplied current, the conductor's movement will generally occur in relation to:
  • The term "drum" in boiler terminology refers to which pressure container?
  • Velocity is a/an ___________ quantity.
  • What do thermocouples require for their operation?
  • A substance that cannot be broken down by chemical means is known as what?
  • A circular chart recorder:
  • What does the term CSA stand for in Power Engineering?
  • What is the rate of doing work called?
  • From which charge do electrons flow?
  • What is the main advantage of using flux-cored arc welding?
  • Transmitters with built-in microprocessors are referred to as what?
  • What type of stress occurs when a material is compressed?
  • Which material is highly preferred for its resilience against high temperatures in piping?
  • For a pneumatic control system, it is imperative that:
  • What must be clearly stated regarding the responsibilities of plant personnel during inspections?
  • Pneumatic signals operate between:
  • Which gas is commonly used as a shielding gas in MIG welding?
  • Steam is defined as?
  • Under what condition is sound produced by a plant generally considered acceptable?
  • Which type of heating coil circuiting is designed to produce a high heat capacity with limited water supply?
  • The output of an immersion type electric boiler is controlled by __________ one or more elements as required.
  • What is carbon that is not combined with hydrogen referred to as?
  • When working with high voltages, the following precautions should be observed:
  • What type of workers were typically hired in the early days of power plants?
  • In a bottom-supported boiler, how is the steam drum typically supported?
  • How are ammeters connected in an electrical circuit?
  • What is the typical function of a safety valve on a pressure reducing valve station?
  • One advantage of the low-pressure flexible watertube boiler is that:
  • According to the Second Law of Thermodynamics, what must be supplied to transfer heat from a colder substance to a hotter substance?
  • What are the three types of actions to address facility problems?
  • In a two-element feed water control system, what does it compensate for?
  • Rippled-finned surface type heating or cooling coils primarily increase heat transfer efficiency through:
  • Which of the following is NOT a use for steam?
  • What is the employer's responsibility regarding personal protective equipment?
  • What is the purpose of a nozzle on a pressure vessel shell?
  • The steam produced by an electrode type boiler primarily depends on which factor?
  • What holds together the sections of a cast iron sectional boiler?
  • If one end of a "U" tube is connected to the discharge of a forced draft fan, what happens to the liquid levels?
  • What can be a consequence of using higher boiler pressures due to unqualified operators?
  • Why do asbestos fibers pose health risks?
  • In a vertical sectional boiler, how are the sections arranged?
  • Which of the following best describes the work schedule common for power engineers?
  • A weld inspector uses ultraviolet light when performing _________ inspection.
  • What is typically used to monitor boiler water quality?
  • What is the main advantage of using a magnifying glass during weld inspection?
  • Where can you find definitions for terms like "shift engineer" and "chief engineer"?
  • Radiators were traditionally made of which material?
  • To extend the life of valve packing, what should be done?
  • A Van Stone flange is fitted ___________ on a pipe:
  • Which of the following devices cannot permanently store data?
  • Sulphur oxides are undesirable in flue gas because they:
  • What is a benefit of a double-welded joint?
  • The power requirements for the FD fan of a fluidized bed boiler are ______ times _______ than other boiler designs?
  • The weld inspection method that utilizes penetrameters is called what type of inspection?
  • When float measurement is impractical within a vessel, where is the float typically installed?
  • What is the main purpose of a reclamation plan in industrial practices?
  • What is a benefit of independent boiler feedwater controls?
  • Fall protection equipment is generally required for workers at heights over what distance?
  • What is the main purpose of the pressure relief valves on gas cylinders?
  • The commutator of a DC machine is usually made of copper bars separated by?
  • What is the primary use of a refrigerant in a refrigeration cycle?
  • Which of the following is often not included in common characteristics of all Acts?
  • Modern radiators are usually made of which material?
  • What should the receiver of a safety work permit do?
  • What is the purpose of handhole and manhole openings in boilers?
  • In Penetrant Testing, what does the term "dwell time" refer to?
  • What is a consequence of soot and ash on fireside tubes?
  • Heating plants with multiple boilers may have what type of feedwater control system?
  • The balanced equation for the complete combustion of hydrogen is:
  • Which extinguisher is commonly used for a Class "C" fire?
  • Which of the following roles is NOT responsible for individual health and safety?
  • The Ultrasonic form of non-destructive examination is done to find?
  • In piping systems, the three main types of flange gaskets are the full face, the ring joint, and the:
  • The problem with using brittle metals is that:
  • In a boiler blowoff system, where is the quick opening valve typically located?
  • The Bourdon tube is often shaped in the form of a "C", having an arc span of about:
  • What is a common use for a DC generator?
  • Which welding process does not rely on an external power source?
  • What is the role of the fan in a forced draft system?
  • Why are stays not normally required in watertube boilers?
  • When using radiographic inspection, defects such as cracks and porosity show up as:
  • Which compounds are primarily responsible for the production of acid rain?
  • If a welding electrode has the following identifying number "E7015", what does the "70" represent?
  • Which type of pilot light is commonly used in gas-fired appliances?
  • In a piping system, what function does the valve stem serve?
  • What type of individuals primarily compose committees that establish standards?
  • Which section of the ASME codes deals with welding?
  • What is the converted temperature in Fahrenheit for -6°C?
  • What do animals primarily use to convert biomass into energy?
  • In an electric control circuit, the sensing unit may also be the:
  • Which burner design is NOT typically used for burning oil?
  • When operating seatless intermittent blowoff valves on a boiler, which valve should be opened first?
  • Which of the following is essential for proper air quality management in a facility?
  • What type of regulations are pursuant to the enforcement of an Act?
  • What is one of the main purposes of the CSA B-52 code?
  • An advantage of having an alternator with a rotating field is that the rotating mass is:
  • What is the primary function of a gas burner?
  • Who is primarily responsible for ensuring the maintenance of personal protective equipment?
  • The main function of the mud drum in a boiler is to:
  • Utility companies impose a surcharge based on what factor?
  • What is the term for the fin surface area of a heating or cooling coil?
  • What is the role of the Authorized Inspector in relation to the Act?
  • What voltage is required to supply a 12 kW motor drawing 24 A?
  • A modulating pressure atomizer regulates its return oil flow using which component?
  • A basic electric control circuit has how many major pieces?
  • One or more steel plates rolled into a cylinder welded together with the ends closed by rounded heads is called a:
  • An evaporator that contains only a small amount of liquid refrigerant at any time is classified as what type?
  • What does the term "interpass temperature" refer to in welding?
  • What can generally be said about water after its usage?
  • The cycling of matter necessary for life is referred to as what cycle?
  • Thick welds are:
  • Which factor most directly affects the risk of electrical fires?
  • Squirrels are herbivores and are part of the food web. When a squirrel dies, what happens next?
  • A decommissioned plant:
  • Control motors are classified primarily into which two categories?
  • How should gas cylinders be stored for safety?
  • An open loop control system requires:
  • Power engineers typically work which type of shifts?
  • A vector quantity has:
  • What should happen during the combustion of fuel in a boiler furnace?
  • Which component is specifically used for measuring temperature in pneumatic systems?
  • The ability of a body to do work by virtue of its position is the body's ___________ energy.
  • What is the purpose of the non-return valve on a boiler?
  • Many plants emit sulphur oxides. From where do these originate?
  • The rotating field of an alternator is produced by applying what type of power to the rotor?
  • What substance is no longer permissible to add to transformer oil due to environmental concerns?
  • What defines an open circuit?
  • What type of heater is classified as cabinet type?
  • What does a thermocouple consist of?
  • In welding, what does the term "spatter" refer to?
  • What role does a cyclone separator play in a boiler steam drum?
  • Which type of boiler uses a circulating fluid bed for combustion?
  • Which of the following components is essential for fire safety within a boiler operation?
  • A material's resistance to indentation is included in the mechanical property known as:
  • Which component is NOT part of "valve trim"?
  • Which type of waste is effectively processed by anaerobic digestion?
  • Fail-closed solenoid operated valves open when:
  • If a fuel-air mixture is below the lower flammable limit, what is the mixture described as?
  • How can a Power Engineer minimize the environmental impact of their facility?
  • Decibels are represented by a/an ____________ scale:
  • Integral and Derivative functions are used to:
  • When chromium is added to alloy steel, it:
  • Which of the following describes a function of a thermocouple?
  • What primary qualification must a power engineer meet before obtaining a Certificate of Competency?
  • How are ultrasonic vibrations converted to electrical pulses during an Ultrasonic Test?
  • When admitting steam to a steam piping system, it is imperative to:
  • When tightening the bolts on a pipe flange, what is the correct method?
  • Where are electrons located in an atom?
  • How do centrifugal collectors primarily remove particulates from flue gas?
  • Which statement about auto-transformers is correct?
  • What is the purpose of the valve cap on a gas cylinder?
  • What is one advantage of the refractory (gas) burner?
  • In which situation is supplemental fire detection equipment necessary?
  • Who may carry out an investigation of an accident involving a power plant?
  • If three resistors of 20, 60, and 120 ohms are connected in parallel with a current flow of 60 A, what will the applied voltage be?
  • What is the primary capability of the "penetrant testing" method in non-destructive examination?
  • How should oxygen and acetylene cylinders be stored to prevent explosive mixtures?
  • When a process controller is located a distance from the sensing element, what does the sensing element send its signal to?
  • Which feature is characteristic of carbon dioxide fire extinguishers?
  • What are short welds made to keep parts aligned while welding called?
  • Where are operational system checks (rounds) required to be recorded?
  • Thermoclines in large bodies of water are characterized by what?
  • When a number of electrons pass a given point over a specific time period, the energy may be referred to as:
  • What is the primary purpose of the Boiler and Pressure Vessel Code?
  • In the SI system, the standard unit when indicating force is the:
  • When should a soot blower be retracted during operation?
  • When carrying out a Radiographic Test on a weld, what is put on the opposite side to record the test?
  • What is the value of the current flow in an electric circuit where the voltage is 12 V and the resistance is 3 ohms?
  • An interrupted pilot of an automatic boiler does what?
  • Before an analog controller can react, digital output signals must be processed by what?
  • What is a primary advantage of using copper tubing in a tubular boiler?
  • What is a welder performance qualification test?
  • Water expands approximately ________ times when converted to steam.
  • What is the main factor that determines ash production during combustion?
  • What safety precaution should be taken when using hazardous materials?
  • What is the pressure range for pressure-atomizing burners fired with light fuel oil?
  • What is one effective method for reducing NOx emissions in a plant?
  • Which process allows fires to endure and renew themselves?
  • Burning metals can be extinguished using which type of extinguisher?
  • What mechanical property is determined by a Brinnell test?
  • What is a function of the joint health and safety committee?
  • Which type of standpipe system requires a supplemental detection system?
  • The Haycock boiler was:
  • What defines the advantage of a modular boiler system?
  • In most sizes of pipe, Schedule 40 corresponds to which type of wall thickness?
  • What is a triple pole single throw switch designed to do?
  • What effect does increasing the DC power supply have on the field strength of an alternator?
  • In an automatic control loop, which component follows the transmitter in the sequence?
  • Which of the following statements about the shell and tube refrigeration evaporator is false?
  • Synchronous motors have construction that is identical to:
  • What code contains guidelines for the care and operation of heating boilers?
  • What is the primary benefit of using an electrically heated boiler?
  • What is the unit of measure for work in the SI system?
  • The apparatus which converts current signals to pneumatic and pneumatic to current signals is called a:
  • The force of friction is:
  • The output from a thermocouple is primarily measured by what type of meter?
  • Aqueous film forming foam agents extinguish a fire by which method?
  • What type of environmental hazard does Class 1 designation refer to?
  • A Class "A" fire typically involves which of the following materials?
  • The earth's water cycle is referred to as the:
  • In a pneumatic control system, the nozzle typically receives a regulated air supply pressure of approximately:
  • Which item provides easy assembly and dismantling of screwed piping connections?
  • A good rule of thumb is to install pipe hangers at ___________ intervals along a pipe.
  • How does a clamp-on ammeter measure current flow?
  • One feature of a watertube boiler is that:
  • According to the definition, what describes a "confined space"?
  • What component is used by convectors to enhance heat transfer?
  • What code contains rules for the construction of low-pressure hot water supply boilers?
  • Inclusions are defined as:
  • In which component is combustion air for burners preheated by hot flue gases?
  • What does a thermocouple measure?
  • Which group recommends updates to the learning materials and criteria necessary for a Power Engineer's Certificate of Competency?
  • In a balanced draft system, the forced draft fan is typically:
  • What is the primary reason for controlling the temperature in welding?
  • What type of heat is found in Column 8 (labeled Hf) of the Steam Tables?
  • The bypass around a regulating valve should contain a ___________ valve.
  • What is at risk if unqualified individuals operate a power plant or pressure plant?
  • What is the approximate amount of excess oxygen required for combustion of gaseous fuel?
  • Putting a controller on manual control implies what action by the operator?
  • A "U" tube manometer may be filled with:
  • The process whereby plants consume carbon dioxide, water, and the sun's energy to make food is known as?
  • Where are the coils or windings located on a DC machine armature?
  • Where is the continuous blowdown pipe located in a boiler?
  • Which code regulates mechanical refrigeration?
  • Which component is not included in the four basic components of WHMIS?
  • At what event must the low water fuel cut-off of a heating boiler shut the fuel off?
  • Which organization ensures that all Power Engineer examinations meet the requirements set by jurisdictional legislative bodies?
  • What is primarily responsible for creating a magnetic field around a conductor carrying current?
  • When butt welding pipe, a backing ring is used to:
  • By which process is carbon returned to the atmosphere?
  • What is the internal resistance to an applied external force?
  • What type of heating element typically uses copper or brass tubes for heat transfer?
  • Which statement about double tube refrigeration condensers is true?
  • A slip type expansion joint:
  • Which option is used to connect pipes of the same diameter, creating a straight run of pipe?
  • Which of the following can be classified as a reducing agent or fuel?
  • What type of fires involve combustible and flammable materials like paper and wood?
  • What is the most common method for removing sulfur dioxide from flue gas?
  • What does the "flash point" of a flammable liquid refer to?
  • What defect is created when the parent metal is grooved during the welding process?
  • Besides a flashlight, which tool is commonly used during a visual inspection of a weld?
  • Which age group reports the highest proportion of workplace injuries?
  • What are the main component metals of "white metal"?
  • Which of the following is an example of a homogeneous mixture?
  • What effect does limestone have when added to a fluidized bed boiler?
  • An element that increases creep strength in metal is:
  • What is a key advantage of using a steel stack over a reinforced concrete stack?
  • The "Pressure Vessels" section of the B-51 code identifies pressure vessels and their installation. What does this section also show?
  • In addition to analog, digital, mechanical, and pneumatic, which form is commonly used for power-plant equipment control?
  • A sensing element sends its signal to which of the following components?
  • When should fire sprinkler hydrostatic testing be performed?
  • Which of the following components is critical for the operation of a watertube boiler?
  • What aspect of the combustion process is directly linked to the type of fuel used?
  • Materials used for the manufacture of pipes for power plants MUST be:
  • To register a boiler, pressure vessel, a pressure piping system, or a boiler fitting, within one of the provincial jurisdictions, what is required?
  • What is the primary purpose of using preheat in welding?
  • What is the primary source of groundwater?
  • The inside diameter of a pipe is expressed as the:
  • When controller output is proportional to the amount of deviation, the controller is:
  • Which of the following processes is NOT suitable for the construction of boilers?
  • The ability of a material to return to its original shape after the force or load that caused the deformation is removed is called:
  • What is the connection provided on DC motors that supplies the armature with power via brushes?
  • To effectively reduce sulphur oxides in flue gas, which method is most appropriate?
  • What are tube stubs used for in relation to drums and headers?
  • What is an important characteristic of eccentric fittings in plumbing?
  • Who is responsible for supplying a Material Safety Data Sheet?
  • What is the correct designation for the "Boiler, Pressure Vessel and Pressure Piping Code"?
  • Definitions for terms such as "shift engineer" and "chief engineer" may be found in:
  • The equivalent resistance of three resistances of 10, 25, and 50 ? connected in parallel is _____ ?
  • Which valve components require regular inspection as crucial parts?
  • The most common material for power plant piping is:
  • Where are clear definitions for refrigeration and air conditioning equipment terms found?
  • Why is a steam boiler blown off intermittently?
  • What is generally easier to amend, a regulation or an act?
  • In the First Law of Thermodynamics, heat supplied equals the increase in internal energy plus what?
  • To start a body moving, which of the following must be overcome?
  • A mechanical atomizing burner has oil pumped under high pressure through which component?
  • Who typically oversees the operating standards in a power plant?
  • Which statement about coil surfaces is incorrect?
  • What type of evaporator increases heat exchange by crimping thin metal plates to single-wall tubes?
  • Daruing the rehabilitation of an injured worker, a supervisor should do what?
  • When the temperature of an object is increased, its change in length is proportional to which of the following?
  • In an atom, what attracts the electrons?
  • The maximum operating temperature for a carbon steel valve is _________ °C:
  • A _________ should be installed just ahead of a steam trap.
  • One disadvantage of using threaded connections to join pipes and fittings is that it:
  • What is typically included in jurisdictional Acts?
  • Of the following, which is NOT an advantage of the visual method of non-destructive testing?
  • In the Steam Tables, which calculation corresponds to total enthalpy?
  • What action does a two-position controller perform when comparing conditions to a set point?
  • If a material provides resistance to magnetic flux, it is demonstrating:
  • Which factor primarily affects the cooling capacity of a refrigeration system?
  • The quickest method of weld inspection is _________ inspection.
  • What characteristic defines a proportional controller?
  • Which extinguishers are typically used to combat a Class "C" fire?
  • A device used to control flow by varying the opening is a:
  • Top guard rings are primarily used on gas cylinders instead of which component?
  • Which type of valve gives good throttling action, takes less actuator force, but does not seal well?
  • The three general types of flange connections are the screwed, the Van Stone and the _____ .
  • The field strength of an alternator can be adjusted by varying what?
  • The low water fuel cutoff is a device fitted to the boiler to shut the:
  • Which Non-Destructive Examination method uses gamma rays?
  • What are the four basic components of WHMIS?
  • The change of position (in meters) per unit time is:
  • What efficiency can fabric filters achieve in a plant?
  • The state of matter of a particular substance is dependent on what factors?
  • Which factor does not affect the performance of hot water heating and cooling coils?
  • What are "seal" welds used for?
  • Which characteristic is true for immersion boiler tube bundles?
  • Which of the following refers to the three reservoirs of the carbon cycle?
  • As the wall thickness of a pipe increases, what happens to the inside diameter?
  • What feature distinguishes unit heaters from convectors in enhancing heat transfer?
  • Which two types of modern coils are used for heating and cooling in air handling systems?
  • Why should hard hats never be painted?
  • When isolating an electric motor driven pump, what should you do first?
  • A conductor supplied with current in a magnetic field will:
  • Flyash is removed from bag filters by a system of?
  • What is the term for the rate of change of velocity?
  • What does the small motor in a kilowatt-hour meter do?
  • What is a characteristic of a long retractable soot blower?
  • The amount of current passed through the water of an electrode boiler depends on the:
  • Which safety device is unnecessary for an electrode boiler where the electrodes are submerged in water?
  • An analog control loop output must be processed through what before the computer can react to the signal?
  • Which of the following is NOT considered a confined space?
  • How do dry and flooded evaporators primarily differ?
  • Which group meets annually to discuss relevant situations for Power Engineers?
  • It is much easier to have changes made to a _____ than it is to have changes made to an Act.
  • Improper drainage of steam lines could cause:
  • What is water formed from the condensing of steam called?
  • What is a key factor in preventing leaks from refrigeration units?
  • What term refers to the secondary rules applicable for enforcing the Act?
  • Which regulation specifically outlines duties and responsibilities of power engineers?
  • What is an alternating current generator typically equipped with that differs from a direct current generator?
  • What are the most commonly used types of water coil circuiting?
  • What is the significance of the term "Global Warming Potential"?
  • Which of the following is NOT considered a pilot for a gas burner?
  • What type of device is designed to start and stop current flow?
  • Which of the following would be used to reduce the temperature gradient for a slower cooling rate of a weld?
  • What is the primary role of power engineers?
  • When a boiler equipped with a combination feedwater control and low water cutoff device shuts down due to a low water condition:
  • Permanent magnets are typically used in which application?
  • Which of the following is NOT an advantage of an electric boiler over other boilers?
  • The face velocity of a heating or cooling coil is best defined as what?
  • What is the primary role of a fuse in an electrical circuit?
  • Stack emission detection techniques must meet standards of this organization.
  • Confined space entry procedures are necessary when there is a lack of what?
  • What is commonly a sign of a strong weld?
  • What determines the classification of the certificate of competency required for the role of chief power engineer?
  • What causes natural draft in a boiler furnace?
  • Shunt wound DC motors are used where speed must remain constant regardless of load, such as on:
  • To ensure proper air venting from a heating or cooling coil, which connection should be at the bottom of the coil?
  • What is the role of power engineers?
  • If a welding electrode has the identifying number "E6016", what does the "1" represent?
  • A single vector that can replace a system of vectors and have the same effect is called a:
  • What advantage does oxy-fuel welding offer?
  • Which scenario represents a physical change in matter?
  • Increasing the spring tension in a pressure regulating valve will __________________.
  • Aside from carbon dioxide, what is another significant source of carbon in the atmosphere?
  • What type of transformers are current transformers classified as?
  • What is the main purpose of the combustion controls on a boiler?
  • What type of furnace is surrounded by brickwork rather than by water?
  • What safety measure is crucial when handling gas cylinders?
  • The output voltage of a shunt DC generator is varied by adjusting the:
  • In order for hydrocarbons to burn, what must be true about the fuel?
  • What is a primary consideration in constructing radiators for steam heating systems?
  • What is considered the basic food source for all organisms?
  • Which material is commonly used for water and instrument air piping in power plants?
  • Which of the following elements is not common in all Acts?
  • In a basic electric control system, an example of a controlled device is a:
  • What is the purpose of a Hazard Assessment and Identification process?
  • An immersion electric boiler can have a capacity as high as how many kW?
  • White cast iron has a high resistance to corrosion and abrasion, making it useful for:
  • What is the best approach to manage solid waste in an environmentally friendly way?
  • Which element in air is crucial for the combustion process?
  • How can condensation losses in steam be avoided?
  • Inlet damper control on a fan is characterized by which of the following?
  • Which code regulates mechanical refrigeration?
  • What can defects in a weld also be called?
  • What is a common fuel type for copper tube tubular heating boilers?
  • Class 1 water treatment, as per ASME section VI, is suitable for which type of boilers?
  • How do Halon agents extinguish a fire?
  • Which of the following is required for synchronizing alternators?
  • Which of the following forces is typically considered in structural engineering?
  • A valve body that seals on the down stroke is categorized as?
  • The stack temperature of a boiler can rise if:
  • Orifice plates, venturi tubes and nozzles belong to the group called:
  • As per ASME section I and section IV, a steam boiler operating at a pressure of ______ or higher is considered a Power Boiler.
  • What is the nature of an open circuit concerning the flow of electricity?
  • What is the primary function of aqueous film forming foam agents?
  • What is the primary function of a valve seat?
  • What does proper groove selection and preparation allow when welding thick materials?
  • Which aspect is NOT typically covered by the regulations governing Boilers and Pressure Vessels?
  • What do you call a material made up of distinct elements, compounds, or both, that are not chemically combined?
  • The calculation of (mv²)/2 represents what type of energy?
  • What type of current flow is described as flowing from positive to negative?
  • What does a check valve do?
  • The greatest load that can be applied to a material under its design conditions is called the:
  • What does the acronym WHMIS stand for?
  • Which surfaces in a firetube boiler are typically not covered in water?
  • What type of joint preparation is often used for thicker materials in welding?
  • What can cause black smoke during combustion in a boiler furnace?
  • What is a significant contributor to thermal pollution in a power plant?
  • What is the purpose of a refrigeration evaporator?
  • What characteristic does a tapered plug valve have?
  • Where are stationary soot blowers typically installed?
  • On a boiler blowoff system, a valve requiring five 360° turns to close is known as what?
  • Contributions to the ecosystem by the environment are in the form of?
  • Which material is commonly used for valve packing?
  • What does a circuit breaker do?
  • What are the two general designs of electric boilers?
  • What type of fittings are designed to ensure proper drainage of water?
  • What does "ash" refer to in the context of combustion?
  • What is a key advantage of a helix-shaped Bourdon tube compared to a standard one?
  • What type of metal can be cut with an oxy-acetylene cutting torch?
  • What type of power supply is necessary for arc welding?
  • The boiler blowoff valves are opened and closed in a specific sequence to:
  • What should an operator have while blowing off a boiler?
  • What signals usually prompt fire pumps to start automatically?
  • To prevent the possibility of a furnace explosion, it is important that the furnace is _____ before the igniter is energized and fuel is supplied to the burner nozzle(s).
  • The purpose of a steam trap is to:
  • In the Steam Tables, what unit is used for pressure?
  • A characteristic that made early boilers very inefficient was:
  • What is a recommended course for workers encountering H2S gas?
  • An advantage of expansion bends is that they are __________ than expansion joints.
  • A sensible heat measurement refers to which of the following?
  • What type of material can be effectively tested using ultrasonic testing?
  • What is the primary document that must be passed through the jurisdictional parliament?
  • Submerged arc welding is a(an)_____ welding process.
  • The major difference between an AC and a DC generator is that a DC generator has:
  • The unit of measure for electrical current flow is?
  • What is the purpose of the distribution pipe that injects feedwater inside a boiler?
  • What is the first step in eliminating hazards in an energy plant?
  • How are low pressure steam pipes commonly joined together?
  • What is another name for a unit ventilator?
  • Which of the following is the worker's responsibility in a health and safety program?
  • What is the purpose of boiler manholes?
  • What is defined as any action on a body that tends to change its size, shape, or state of motion?
  • Nitrous oxides and CFC's both have a damaging effect on:
  • What is true about a proportional-only controller?
  • Where is boiler water with the highest dissolved solids concentration found?
  • Which of the following is NOT a common type of refrigeration condenser?
  • Which of the following is an advantage of cast iron boilers?
  • What is the electrical designation for an area where easily ignited material fibers are handled?
  • What is a common consequence of not adhering to sound guidelines in an industrial setting?
  • What type of resistance must an ammeter offer to the circuit?
  • Which component is responsible for circulating refrigerant in a refrigeration system?
  • On a steam boiler with single element feed water control, what is the measure variable?
  • Which copper alloy is characterized by the inclusion of tin and sometimes zinc?
  • Which elements are considered the three major components of an ecosystem?
  • Which type of heater is classified as baseboard?
  • What is one key advantage of using natural gas as a fuel in a boiler?
  • What is a primary application of flyash collected by pollution control devices?
  • During a fire, which gas is typically produced by combusting materials?
  • In the ecosystem, what role do green plants serve?
  • What is a common feature of logic systems in control mechanisms?
  • What is required as part of the approval process for a new industrial facility to mitigate long term environmental impacts?
  • Which type of burner is typically used for high pressure oil combustion?
  • Which type of control does a proportional-only controller NOT employ?
  • What classification is assigned to electrical equipment in an area with hazardous concentrations of flammable gases or vapours?
  • The water flow through a modular cast iron boiler system:
  • Pipe nipples are _____ on both ends.
  • What is one of the fundamental requirements for sprinkler system maintenance?
  • In an electrostatic precipitator, what charge does the discharge electrode have?
  • Cooling ponds and towers are used to:
  • What does the boiler MAWP determine?
  • What occurs between unlike charges in electricity?
  • Pressure controllers are categorized into two main classes based on what criterion?
  • Which function do control valves provide in a piping system?
  • How is the capacity of a body to do work defined?
  • Programmable Logic Controllers (PLCs) are commonly used for which application?
  • What code regulates power boilers used in locomotive service?
  • What type of electrical connection is typically used for high-load circuits?
  • What occurs when current flows in a conductor?
  • What is the amount of heat absorbed by water when it evaporates at atmospheric pressure?
  • What is a method used to prevent flue gas leakage in a packaged watertube boiler?
  • Stiffness is defined as the ability of a material to:
  • The first pass of a multi-pass weld is known as the:
  • What is the classification of a Certificate of Competency holder who may act as an engineer?
  • Which factor does NOT influence the sound levels considered acceptable in industrial settings?
  • Which type of pollution is most directly associated with thermal pollution from industrial processes?
  • In a process control system, what role does a controller perform?
  • Fire pump testing is outlined in which standard?
  • Which pressure measurement device is used to determine a fluid's pressure drop across a system component?
  • Whether or not solid waste can be re-used or not depends on?
  • Which classes of fires are foam extinguishers specifically recommended for?
  • An air atomizing burner utilizes an air pressure of approximately:
  • What is a significant drawback of landfills for liquid waste disposal?
  • CO2 is the chemical symbol for:
  • What type of fire can be extinguished using water?
  • Where should maintenance on portable fire extinguishers be performed?
  • Why is carbon dioxide now being measured in flue gases?
  • Ultrasonic inspection involves:
  • Brass and bronze are alloys of:
  • What is one of the primary purposes of an environmental impact assessment?
  • Welding defects can be categorized into which of the following types?
  • What is a benefit of corrugated furnaces in boilers?
  • The maximum voltage generated by a single loop DC generator occurs when the conductor is cutting the magnetic lines of force at an angle of:
  • If engineers require a material that can be stretched and reduced in cross-section without breaking, they would choose a material that is:
  • The purpose of a steam separator is to remove what from the steam?
  • How does a grease trap operate effectively?
  • The purpose of a combustion chamber in a boiler is to:
  • In an early shell-type boiler, what part served as its heating surface?
  • What is the main advantage of a smart transmitter compared to a standard transmitter?
  • The following fusion welding process utilizes a flame.
  • Steam traps may also remove _______ from steam lines.
  • To transfer power to or from the rotor of alternators, ____________ are used?
  • Which gasket has an oval cross-section?
  • Which of the following emissions is NOT considered a gaseous pollutant?
  • What must a candidate hold to apply for a Power Engineer certificate of competency examination?
  • Soldering and brazing are:
  • The advantage of using a venturi tube, rather than an orifice plate for flow measurement is it:
  • How often should transformers be inspected?
  • The ignition temperature of a fuel/air mixture refers to which of the following?
  • Which device is used to convert alternating current (AC) to direct current (DC)?
  • A bimetal thermometer consists of which of the following?
  • When magnetic flux produced by one coil induces an EMF in a second coil, what is this phenomenon called?
  • What is steam containing water particles in suspension known as?
  • A compound wound DC generator has a combination of shunt and which other characteristics?
  • What role does soil play concerning groundwater?
  • What is the typical respiratory effect of asbestos exposure?
  • How can the total equivalent resistance of three resistances in a series circuit be expressed?
  • What is the main characteristic of an element in chemistry?
  • Which of the following metals is primarily used in structures due to its high strength-to-weight ratio?
  • What regulation lists the requirements for anyone wishing to write an applicable jurisdictional examination?
  • The material used in foam extinguishers is effective against which types of fires?
  • What does "adaptive" action allow a plant to do when a problem has been identified?
  • What is the typical amount of pre-mix air to an atmospheric burner?
  • The Bourdon tube can be used with a bulb and capillary tube to measure:
  • Which pilot is most often used on small boilers?
  • What device is used to measure temperature in a boiler system?
  • The rate of change of velocity is called:
  • What is the ratio between the ultimate strength and the allowable stress called?
  • Which process refers to an absorbed or released heat during a phase change?
  • What is a highly effective practice for managing industrial wastewater?
  • Beading the tube ends in a firetube boiler:
  • What constitutes a Class "C" fire?
  • What is the term for the compressed air used as atomizing air in oil burners?
  • What should be done with valves that are not clearly identified?
  • The space or zone around a magnet through which lines of force can be detected is termed?
  • Which device is used to measure voltage in a circuit?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy